Carpet Cleaning Questions With Answers – FAQs

By | May 16, 2018

Different equipment manufacturers differentiate themselves by establishing their own cleaning substance or powders formula and customizing their equipment design and function.Related image

Water removal cleaning typically involves application of cleaning agent on soiled surface, agitation of carpet with brush and then rinsing. After cleaning agent settle in the carpet for a brief duration, the carpet will be “washed” by way of a carpet cleaning equipment to wash the cleaning agent carefully and finally left to dry in room or air conditioned temperature

A great average sized carpeted office of 3000 sq ft would normally take about 2 hours to wash and will take at minimum 4 hours to dried out. Most companies would suggest carpet to be washed in the late evening so that after it is done, the carpet can be left to dry over night and office procedure can continue normal again the next morning hours.

Shampoo carpet cleaning was popular till encapsulation technology was introduced during the 1970s. While shampooing it may seem to be to clean heavily soiled carpet cleaning Airdrie, the technology’s disadvantage – leaving behind high amount of wet foam elements in the carpet that takes a very long time to dry, becomes sticky when it dries because no wash it is done after shampooing and rapid re-soiling of carpet – makes this method less popular than others.

Foam encapsulation use synthetic detergents as a base that will crystallize into powder form when dries. Loosened dirt contaminants in carpet fibre will be encapsulated into powdered when the applied cleaning foam dries and, ultimately, vacuumed or brushed when the foam dries after cleaning.

The foam encapsulation cleaning technique has overtaken carpet shampooing technology as the former uses less water during cleaning which cause shorter drying time compared to the carpet shampooing. The foam encapsulation cleaning has received thumbs upward by those who recommend using of environmental friendly products because there is less chemical residue remaining behind after cleaning in contrast to carpet shampooing.

Even though this technique has shown good cleaning results, this cleaning method has not been able to completely clean heavy soiling carpet as a result of technology’s limitation.

This rug cleaning produce good surface cleaning result as the process mainly involve cleaning the top section of the carpet fibre by using a durable motorized machine with a spinning mat that has been immersed with cleaning solution to absorb dirt from the carpet surface.

Bonneting is popular in hotels because it can provide a quick fix solution to clean carpet in heavy traffic public area that require carpet to be cleaned with little moisture and can dry quickly to prevent leading to inconvenience to hotel guests.

Because bonneting does not clean carpet deeply, dirt beneath the carpet would emerge back to the area within short period of time, creating carpet to get soiled again quickly. Bonneting also is likely to cause accumulation of chemical residue in the carpet as pressure from the heavy machine on the spinning pad drive the applied chemical and remaining dirt into the carpet.

Dry carpet cleaning or compound cleaning is one of the latest cleaning technology found in the market and has gained increasing popularity and approvals by leading carpet manufacturers due to the effective cleaning performance and convenience as it does not require blow drying time.

Since it was invented in 1980s, there are many types of cleaning compound or powders that contain been developed in the market. As this technology is known as relatively new in contrast to other conventional moist carpet cleaning methods that contain been trusted and used for decades, many still doubt the effectiveness of this cleaning technology.

Leave a Reply

Your email address will not be published. Required fields are marked *